cn

LIDT

激光损伤阈值测量

在AOI=0°; ave-pol; 100 Hz条件下的LIDT检测
镀膜类型测试波长脉宽测试模式LIDT下载
AR @ 355 nm355 nm5.2 ns10-on-119.60 J/cm²
100-on-119.60 J/cm²
1000-on-119.20 J/cm²
AR @ 1080 nm1064 nm9.7 ns1-on-170.00 J/cm²
10-on-170.00 J/cm²
100-on-170.00 J/cm²
1000-on-170.00 J/cm²
AR @ 1064 nm1064 nm9.8 ns1-on-143.80 J/cm²
10-on-143.80 J/cm²
100-on-143.80 J/cm²
1000-on-142.90 J/cm²
HR @ 1535 nm1535 nm4.6 ns1-on-158.10 J/cm²
10-on-158.10 J/cm²
100-on-158.10 J/cm²
1000-on-158.00 J/cm²
PR @ 1535 nm1535 nm4.6 ns1000-on-167.70 J/cm²
AR @ 1535 nm1540 nm6.4 ns1000-on-151.10 J/cm²
HR @ 2090 nm + HR @ 1910 nm2090 nm4 ns10-on-110.90 J/cm²
100-on-110.90 J/cm²
1000-on-110.90 J/cm²
HR @ 2090 nm + HR @ 1910 nm2090 nm4 ns1000-on-17.50 J/cm²
AR @ 1910 nm + AR @ 2090 nm2090 nm4 ns1000-on-1>20.50 J/cm²
AR @ 1910 nm + AR @ 2090 nm2090 nm4 ns1000-on-111.00 J/cm²
AR @ 1910 nm + AR @ 2090 nm2090 nm4.3 ns1000-on-119.98 J/cm²
PR @ 2090 nm2090 nm4.3 ns1000-on-114.30 J/cm²
PR @ 2090 nm2090 nm4.3 ns1000-on-1>24.20 J/cm²
PR @ 2090 nm2090 nm4.3 ns1000-on-1>20.90 J/cm²
PR @ 2090 nm2090 nm4.3 ns1000-on-1>22.50 J/cm²
PR @ 2090 nm2090 nm4.3 ns1000-on-1>24.20 J/cm²
PR @ 2090 nm2090 nm4.3 ns1000-on-124.90 J/cm²
在AOI=45°; s-pol; 100 Hz条件下的LIDT检测
镀膜类型测试波长脉宽测试模式LIDT, J/cm²下载
HRs @ 515 + HTp @ 1030 nm515 nm712.7 fs100k-on-10.72 J/cm²
1M-on-10.48 J/cm²
15M-on-10.20 J/cm²
HR @ 520 nm (21A05)532 nm5.7 ns1000-on-115.20 J/cm²
AR @ 1910 nm + AR @ 2090 nm2090 nm5.3 ns1000-on-118.20 J/cm²
Pol. @ 2090 nm + @ 1910 nm2090 nm5.3 ns100-on-117.20 J/cm²
HR @ 2050 nm2090 nm5.3 ns1000-on-19.30 J/cm²
在AOI=45°; p-pol; 100 Hz条件下的LIDT检测
镀膜类型测试波长脉宽测试模式LIDT, J/cm²下载
HR @ 1040 nm1064 nm10.2 ns1-on-129.90 J/cm²
10-on-129.90 J/cm²
100-on-129.90 J/cm²
1000-on-114.90 J/cm²
HR @ 1040 nm1064 nm10.2 ns1-on-137.40 J/cm²
10-on-137.40 J/cm²
100-on-137.40 J/cm²
1000-on-137.80 J/cm²
Pol. @ 2090 nm + @ 1910 nm2090 nm5.3 ns10-on-112.30 J/cm²
100-on-112.30 J/cm²
1000-on-112.30 J/cm²
HR @ 2090 nm2090 nm4.3 ns1000-on-1>22.70J/cm²
HR @ 2100 nm2090 nm4.3 ns1000-on-17.50 J/cm²
在AOI=45°; 100 Hz条件下的LIDT检测
镀膜类型测试波长脉宽测试模式LIDT, J/cm²下载
HR @ 343-355 nm355 nm5.4 ns1000-on-15 J/cm² (s-pol)
HR @ 343-355 nm355 nm5.4 ns1000-on-16 J/cm² (p-pol)

Disclaimer Laser induced damage threshold (LIDT) measurements are performed on actual components produced by Altechna. Individual component’s LIDT depends on multiple parameters (substrate material, polishing batch, coating batch, storage conditions, etc). Damage threshold value reached for above individual components should be used for reference only but it is not guaranteed for all optics. Altechna can perform coating damage threshold testing service upon request.